Price
Call for pricingArriving Soon · Oct 2026UpgradesStock photo
- Capacity
- 60 ton
- Deck height
- 22"
- Overall length
- 53.3'
- Width
- 108"
- Type
- Double Drop
Build sheet
Profile
- 60 ton
- 108" wide
- 27' deck
- 22" deck height
- 53.3' OAL
As-built upgrades on this unit
- Deck Length: Drop Side Rail Deck (DSR) design - 27 feet clear deck length Note: OAL with this option is 53 fee 3 inchest with standard axle spread
- Deck Width: 9 feet (Deck Only) Note option increases deck width to 9ft bogie width remains 8 ft 6 in
- Wheels: 8.25 x 22.5 Outer Aluminum outside/steel inside - hub-piloted
- Additional Marker Lights: Additional Marker Lights Installed
Overview
| Capacity | 60 tons in 13-foot length with 102 inches swing and 4 axles close coupled with flipbox deployed 137 inches swing; : 55 tons in 16-foot length with 137 inches swing and 3+1 EQ1; 55 tons in 10 feet with 102 inches swing and 4 axles closed coupled - GAWR and GVWR determine legal payloads |
|---|---|
| Compatibility | Designed to accept 51/60 rear axle below, spreader and/or 35 inch flipbox - none |
Gooseneck
| Gooseneck Type | Hydraulic removable "shaft and hook" gooseneck |
|---|---|
| Connection | Fastest, most versatile in the industry - connect or disconnect on uneven ground |
| Ride Height | Standard dual cam pawl with 7 ride height positions at 50" loaded fifth wheel height |
| Swing Radius | 102 inches (11 feet 11 inches overall gooseneck length) |
| Flip Box Connections | Connections for optional 23" flip box (125" swing radius) |
| Wet Line | Set up for wet line operation (pony motor optional) |
| Electrical Receptacle | J560 7-pin electrical receptacle |
| Gooseneck Design | Narrow hydraulic removable non-ground bearing - swing radius of 102 inches (11ft 11in overrall gooseneck length) set up for wetline operation |
| Loaded Fifth Wheel Height | Dual Cam Pawl Arm Assembly with 7 ride height positions (50 inches nominal) |
| Kingpin | Removable kingpin at 102 inch radius |
| Power Source | Set up for wet line operation |
| VIN Plate | Bilingual VIN plate |
| Registration/Document Holder | Registration/document holder installed |
| Hydraulic Fittings | OEM Standard 1/2 inch |
Deck
| UpgradeDeck Length | Drop Side Rail Deck (DSR) design - 27 feet clear deck length Note: OAL with this option is 53 fee 3 inchest with standard axle spread |
|---|---|
| Overall Width | 8' 6" overall width (9' width optional) |
| Loaded Deck Height | 14.5 inches at siderails 23 inches at main beams with 6 inch ground clearance |
| Front Ramps | Manual front approach ramps included |
| Ride Height Control | 7-position rear ride-height control system for improved mobility |
| Crossmembers | On 24 inch centers (nominal) |
| Recessed Crossmembers | Last 3 crossmembers are recessed to accommodate optional hammer plate |
| Flooring | 1.5 inch nominal wood - side rails only |
| Swing-Out Outriggers | 26 swing-out outriggers provide greater width for versatility (13 on each side) |
| Hook-On Outriggers | 4 heavy-duty removable hook-on outriggers (2 on each side) |
| Tool Box | 2 Fully covered trays in front of deck between mainbeams with lockable covers |
| Framework | All main longitudinal members fabricated with 100,000# minimum yield steel flanges with 50,000# webs |
| UpgradeDeck Width | 9 feet (Deck Only) Note option increases deck width to 9ft bogie width remains 8 ft 6 in |
| Hammer Plate | Hammer Plate installed over recessed crossmembers. Preforated plate under hammer plate forming two storage areas. 2 pair lashing ring located in last two deck sections. |
| Extension Brackets | 13 pair - 26 total removable swing type, 2 pair - 4 total heavy duty removable hook-on type |
| Front Bogie Ramp | Included |
| Boom Trough | Low Boom Well V crossmembers with bolt-in V pan |
| Deck to Bogie Connection | Fixed |
| Bolsters | Recessed |
| Rear Bogie Height | 41 inches to top flange - 37 inches to top of bolsters |
| Connections for Future Axle Attachment | Air and electrical connections to go along with connecting ears |
Axles
| Number of Axles | 3 axles |
|---|---|
| Axle Capacity | 25,000 lb. nominal capacity per axle NOTE: GAWR determined by suspension type, brakes, tires and other components. |
| Axle Spread | 54.5 inches (between axles) |
Suspension
| Suspension | Air ride |
|---|---|
| Chain Lift | First Axle (acts as limit chains) |
| Override Chains | Override Chains Axle 2 & 3 |
| Third Axle Lift | Air lift |
| Mechanical Ride Height Control | 7-position mechanical ride height control system |
| Manual Dump Valve | Manual Dump Valve (Push Pull) |
| Liquid Filled Gauge | Liquid filled air gauge installed |
Brakes
| Brakes | 16.5 inches x 7 inches with 5.5 inches autoslacks - heavy duty brake drums - outboard mount |
|---|
Tires & Wheels
| UpgradeWheels | 8.25 x 22.5 Outer Aluminum outside/steel inside - hub-piloted |
|---|---|
| Tires | 275/70R 22.5 OEM standard |
Lighting & Electrical
| Lights | DOT sealed beams with LED lights on gooseneck, deck and bogie |
|---|---|
| Marker/Tail Lights | 7 marker lights per side including mid turn signal and 3 tail lights per side |
| Strobes | 4" flush mounted center flashing amber strobes with battery back-up to operate disconnected from tractor |
| Electrical System | DOT sealed beam and harness with LED lights and 4 inch flush mounted battery powered amber strobes |
| Tail Lights | 3 tail light package |
| Electrical Receptacle | J560 7-pin connector |
| Marker Lights | 3 marker lights per side including mid turn |
| UpgradeAdditional Marker Lights | Additional Marker Lights Installed |
Securement
| D-Rings | 34 total D-Rings located on deck and bogie, 17 on each side |
|---|---|
| D-Ring Type | Bent type for longer chain life and better securement |
| Flag Holders | 4 flag holders located at front of deck and rear bumper |
Paint & Finish
| Coating | Highest quality 2-part polyurethane enamel fights corrosion to extend service life |
|---|---|
| Primer | Primed for better paint adhesion |
| Paint | Fontaine black polyurethane enamel |
| Lash Rings | 19 pair - 38 total (standard deck) |
| Flag Holders | 2 pair flag holders |