2027 Fontaine Workhorse 55LCC

Price

$104,000+FET

Est. $1,676/mo at 8.75% APR for 72 months with 10% down, on approved credit.

Price excludes 12% FET*. Check “Include FET” to add it.

Pending SaleCall for availabilityUpgrades

Drawing shows the trailer type, not to scale.

Accent Package: Accent Package Installed REV 1
Covered Rear Bogie: Bolt-on load bearing wheel covers (Individual pieces per axle- 6 pieces) REV 1
Wheels: 8.25 x 22.5 Outer Aluminum outside/steel inside - hub-piloted
Additional Marker Lights: Additional Marker Lights Installed
Paint: Premium polyurethane enamel matched to Fontaine paint brand Viper Red PN 51130170/KPR0120 REV 1

Capacity	55 tons in 13-foot length with 4 axles close coupled; - GAWR and GVWR determine legal payloads
Load Base	13-foot rigid 2-point load centered in deck area with 4 axles close coupled
Length (Trailer Only)	52 feet 10 inches (with standard deck length and axle spread)
Compatibility	Designed to accept 55/60 rear axle below
Overall Length	52.83 ft
UpgradeAccent Package	Accent Package Installed REV 1

Design	Narrow hydraulic removable non-ground bearing - swing radius of 108 inches (12ft 7in overrall gooseneck length) set up for wetline operation
Loaded Fifth Wheel Height	Dual Cam Pawl Arm Assembly with 7 ride height positions (50 inches nominal)
Kingpin	Removable kingpin at 89 and 108 inch radius
Power Source	Set up for wet line operation
Hydraulic Fittings	OEM Standard 1/2 inch
Tool Box	None
VIN Plate	Bilingual VIN plate
Registration/Document Holder	Registration/document holder installed

Framework	All main longitudinal members fabricated with 100,000# minimum yield steel flanges with 50,000# webs
Deck Design	Flat Level Deck (FLD) design - standard 26 feet clear deck length - OAL 52 feet 10 inches
Deck Width	8 feet 6 inches overall (unless optional deck width is selected)
Loaded Deck Height	18 inches with 6 inches ground clearance
Crossmembers	On 24 inch centers (nominal)
Chain Slots	Chain Slots located on siderail
Flooring	2 inch nominal wood - side rails only
Front Ramps	Manual front approach ramps included
Extension Brackets	13 pair - 26 total removable swing type, 2 pair - 4 total heavy duty removable hook-on type (26 swing type, 4 hook-on type on 27 foot deck)
Tool Box	2 Fully covered trays in front of deck between mainbeams with lockable covers
Hammer Plate	Hammer Plate installed over recessed crossmembers. Preforated plate under hammer plate forming two storage areas. 2 pair lashing ring located in last two deck sections.
Deck Length	Flat Level Deck (FLD) design - standard 26 feet clear deck length- OAL 52 feet 10 inches
Front Bogie Ramp	Included as standard
Boom Trough	Low Boom Well V crossmembers with bolt-in V pan
Deck to Bogie Connection	Fixed
Bolsters	Recessed
UpgradeCovered Rear Bogie	Bolt-on load bearing wheel covers (Individual pieces per axle- 6 pieces) REV 1
Rear Bogie Height	40 7/8 inches to top flange - 36 5/8 inches to top of bolsters
Connections for Future Axle Attachment	Air and electrical connections to go along with connecting ears
Bumper	Heavy duty V-style rear bumper

Number of Axles	3 axles
Axle Capacity	25,000 lb. nominal capacity per axle NOTE: GAWR determined by suspension type, brakes, tires and other components.
Axle Spread	54.5 inches (between axles)
Brakes	16.5 inches x 7 inches with 5.5 inches autoslacks - heavy duty brake drums - outboard mount
Spring Brakes	None

Suspension	Air ride
ABS	None required
Chain Lift	First Axle (acts as limit chains)
Override Chains	Override Chains Axle 2 & 3
Third Axle Lift	Air lift
Mechanical Ride Height Control	7-position mechanical ride height control system
Manual Dump Valve	Manual Dump Valve (Push Pull)
Liquid Filled Gauge	Liquid filled air gauge installed

Brakes	16.5 inches x 7 inches with 5.5 inches autoslacks - heavy duty brake drums - outboard mount

UpgradeWheels	8.25 x 22.5 Outer Aluminum outside/steel inside - hub-piloted
Tires	275/70R 22.5 OEM standard

Electrical System	DOT sealed beam and harness with LED lights and 4 inch flush mounted battery powered amber strobes
Tail Lights	3 tail light package
Electrical Receptacle	J560 7-pin connector
Marker Lights	3 marker lights per side including mid turn
UpgradeAdditional Marker Lights	Additional Marker Lights Installed

UpgradePaint	Premium polyurethane enamel matched to Fontaine paint brand Viper Red PN 51130170/KPR0120 REV 1
Lashing Rings	19 pair - 38 total (with standard deck option)
Flag Holders	Flag holders - 1 pair located at front of deck and on rear bumper
Compatibility	Designed to accept 55/60 rear axle below

2027 Workhorse 55LCC